How To Draw Dashed Lines In Photoshop

How to draw a dotted line. How to draw a dotted line in Photoshop. Creating a dotted line curve in Photoshop

In Photoshop, there is no "right" way of drawing lines - every artist and designer with time finds its own methods and chooses the tools that are comfortable. Regardless of whether you use the "line", "pen" or "brush" tool, you can approach the creative project different ways And at the same time get the same results. In that practical manual We will tell you how to draw straight lines in Photoshop using many drawing tools are available in this program.

"Line" tool

To find the "Line" tool, press and hold the mouse button above the "Rectangle" tool on the main toolbar. The menu will be open to select the tool shape. If you enable any tools of figures, you can also select the "LINE" tool in the upper parameter menu.

Why is the "line" tool is considered figure? In fact, the "line" tool simply creates thin rectangles that look like lines, because the colors of Fill Fill and the Stroke contour are the same. If you want the line to be empty inside (like a rectangle), just turn off the fill.

Using the "LINE" tool, it is easy to draw straight lines. Just click at any point of the image and drag the line in the desired direction. If you want to draw a strictly horizontal or vertical line, hold the SHIFT key when dragging, and Photoshop takes care of everything else.

Having learned to draw straight lines in Photoshop, you can experiment with advanced parameters and create dotted lines from points or strokes. To find these settings, click the "Stroke Options" icon on the left side of the parameters panel, and then select "More Options". Here you can specify and save custom settings, enable dotted line And choose the length of the strokes and spaces.

Tool "Brush"

The "Brush" tool also allows you to draw straight lines, and, unlike the "LINE tool", allows you to create your own styles of brushes. The "Brush" tool is located on the main toolbar, it is located separately from the form tools.

To create perfect straight lines in any direction, hold the SHIFT key when drawing using the Brush tool. To create a figure of multiple lines, draw a line while holding the shift, release the mouse button, press the Shift button again, and then start drawing a new segment from the end point of the last line.

Like the "Line" tool, Brush has many stroke parameters that can be changed on the top panel of parameters, including hardness, opacity and brushing style. We recommend setting up these parameters before starting to draw strokes, because the changes will not be applied to all brush strokes that you have already done.

Tool "Pen"

Finally, the PEN tool is extremely useful for drawing straight and curved lines. To select the PEN tool, click on the pen in the shape of the pen on the main toolbar, then click on the image on the image to set the starting point, and once again to set the end point. Photoshop will automatically create a straight line between two points, regardless of where they are located in the image. If you hold the SHIFT key when setting these points, you can create linear segments with inclination angles of 45 and 90 degrees.

We make a frame from dots, cakes, dotted lines in Photoshop

In this material, as understandable by header, we will look at the methods of drawing dotted, bar and point frames. Let's decide right away: all frames we will draw on a new layer! Run forward, I will say that the method described below relates to versions Photoshop. CS5 and below.

Creating a frame from dots

Such frames are created using an ordinary round brush from a standard photo stall kit. Frames may have round, oval. rectangular, as well as any irregular shape, because They are described by contour. Let's first set up a brush. If anyone does not remember, to open the brush setting panel, you need to select the brush tool, and then click on the corresponding button in the Polel panel. The following settings were applied in the drawing on top of the inner round and inner square (click on the image to enlarge):

Now let's create the contour, in the form of which there must be a frame, it can be done using any contour tools, pen (Pen Tool), a rectangle (Rectangle Tool), etc. The contour can be both closed and open. Next, click the right mouse button along the contour. Important: The contour tool at this point should be active! In the window that appears, select the line "Perform circuit stroke" (STROKE PATH). A new window will open, where we will offer to choose the stroke tool. In this case, we will suit the brush or pencil (Pencil). I remind you that the brush or pencil must already be configured. After selecting the tool, click OK, and points will appear on the circuit. Points made by brush are obtained somewhat lubricated, so after applying points it does not interfere with the applied contour edge filter (Sharpen edges), settings to choose individually. Here is an example of a screen obtained using the operations described above:

The following brisk settings were applied: Text: Type - Pencil Kehel (Size) 3 PKS, Stiff (Hardness) 100%, Interval (Spaction) 180% Uploading: Type - Brush, Kehal (Size) 3 PKS, Hardness (Hardness) 100% Interval (Spaction) 205% Frame: Type - Pencil, Kehel (Size) 6 PKS, Stiffness (Hardness) 100%, Interval (Spaction) 180%

Creating a framework of dashed lines

Rectangular frames, i.e. Consisting of vertical and horizontal lines, do not cause any problems. You can draw them with a rectangular brush from the default set of photoshop. Open the brushes control panel and download them, as shown in the figure. Next, set the brush settings are approximately such as the round brushes specified above. Then I stretch out a little fingerprint form, this is shown in the screenshot.

Such a brush can be carried out a horizontal line. But the vertical will not work, or rather, it will turn out, but ugly:

To create a vertical intermittent line, you need to turn a brush imprint by 90 or 270 degrees:

Now you can safely draw and vertical intermittent line:

But if I need a dotted in a circle or on any curve, then this method is no longer suitable. We choose a round brush, set the diameter of the imprint of 9 pixels, the interval is 170%. Create a circuit, perform a circuit stroke, as in the case of points. Next, click on the right mouse button along the contour, select the item "Education Dedicated Area" (Make Selection) with a radius of ancient 0. Here is a given screenshot:

3 votes

Good day, dear readers of my blog. It would seem that it is worth drawing a straight line in Photoshop? Shipped Shift and here you please. Nevertheless, it can be done in three ways. The result of everyone will be different.

From this article you will learn three ways to spend a straight line in Photoshop. Which filter apply to create a wave. How to do with another interesting tool. I will show how to achieve a dotted line and draw at a certain angle.

You are waiting for a lot of information. Let's proceed?

Tool "Line"

To begin with, I will show you how to use a tool that is designed to create smooth lines. At this place, you can have a rectangle, oval, ellipse or polygon. Just for a few seconds, hold the left mouse button on the button on the button to open the menu with additional tools.

First of the important. One of the most important parameters - thickness. Thanks to the line, you can draw even rectangles. Just need to make her elder.

Next is the "fill" and "stroke". Click on a raid with the color to the left of the inscriptions and choose a shade. If you want to run the stroke, enter its width. Now, on my screenshot is shown without it. The absence icon of color looks like this. Gray line crossed red.

You can see the settings and the result on this screenshot. Not very visible, but the thickness here is 30 pixels. In a large picture, 30 pixels may look like a modest strip. Everything needs to be adjusted to your own sizes.

This is how the line will look like, if you choose a red stroke color.

The next button will allow you to make a dotted stroke.

If you reduce the thickness and remove the fill, you will get just a dotted.

Here you can align the stroke through the inner edge, the external or center of your contour.

And round the corners. True, it will not be so noticeable.

If at the moment you lead the line, press Shift, then Photoshop will automatically create a flat line. Horizontal or vertical. Depending on where you lead it.

If you need a line at a certain angle, it is easiest to see what the information window shows and correct it manually, directing in a certain direction.

Well, now I will show another.

Tool "Brush"

These rectangles I painted with a brush-drawn lines.

Choose the type and size suitable for the brush line.

Put the point in the estimated start of the line, clamp shift and click the left mouse button where the strip must end.

Before you two lines. Yellow painted using a "line" tool, a lilapidious brush.

How to make a wave

It does not matter what tool you used to make a wavy line the easiest way with the filter. Come in this category, find the "distortion" and choose the "wave".

Focusing on the picture with a pre-show you will quickly understand what to do what and how to configure it. The amplitude should be approximately the same. If it does not work, you can simply press on the "randomization" until the appropriate.

There is always the last applied filter fast access. Apply it to a layer with a yellow strip drawn by a tool.

Here I received this result. As you can notice, it is different.

Pen tool

To be honest, I still can not work professionally. I know that they can draw anything: exactly, fast, fun and cool, but I have a lot of time and the result is not always at the level I expected. And nevertheless, I can even draw straight lines with pen. With curves worse, but I will try. I choose Pen.

I put the point, then the second. While I did not let go of the mouse button setting smoothness.

The same gets out with each new point.

After all manipulations are completed right-click Mouse and in the menu that appears, select "Perform a circuit stroke".

You can choose several tools: pencil, brush, stamp, pattern, and so on. Now let this be a brush.

Again, I press the right mouse button and select "Delete Contour".

That's the result I got.

Well, do not forget that you can always take advantage of the creation of collages. Read the article about, and you can take a line from any picture and insert it into your image.

If you want to learn how to work professionally and other tools that are in Photoshop. I can offer you a course " Photoshop for beginners in video format ».

Lessons created by professionals will teach you everything that you need to know about this program. You will save a bunch of time to search for answers to a particular question. In your head, ideas will appear on how to fulfill the task.

By the way, do you know how to make sure that you have always arose interesting needs related to photoshop? It can withdraw your relationship with this program to a new level. All you need is to get involved in web design. People of this profession never sit idle. There are always customers, projects and new tasks.

The work will be found for everyone, and you can do what you really like and brings good money. Read the article about that or. Stop inventing yourself tasks, let someone pay money for your time.

Do not know where to start? Complete the course " Basics of Commercial Web Design " Try several free lessons, it will help you understand yourself and understand whether you will be ready to master new horizons.

An online course with the support of the author is a reliable investment in the future profession.

That's it. It remains for you. Decide when you are ready and proceed to the conquest of new vertices. If you like this article - subscribe to the newsletter and approach the cherished target every day.

Learn as much as possible about the Internet, write your success story, stop sitting waiting. Act. Your dream is embodying others every day. Today they make something you want so much time. Do they think about readiness? The right moment has come right now. Do not miss it. You have for power.

I wish you good luck. To new meetings.

Photoshop is not a program for creating drawings, but still sometimes there is a need to portray drawing elements.

In this lesson, I will show you how to make a dotted line in Photoshop.

There is no special tool for creating dotted lines in the program, so we will create it yourself. This tool will be a brush.

First you need to create one item, that is, the dotted.

Create new document Any size, preferably smaller and poured white background. This is important, otherwise nothing will work.

Take the tool "Rectangle" And set it up, as shown in the pictures below:

Dotted sizes Choose your needs.

Then click anywhere in the white canvas and, in the dialog box that opens, click OK.

Our figure will appear on the canvas. Do not worry if it is very small in relation to the canvas - it does not matter.

Give the name of the brush and click OK.

The tool is ready, let's spend a test drive.

Choose tool "Brush" And in the brushes palette we are looking for our dotted.

Then click F5 And in the window that opens, you set up a brush.

First of all, we are interested in intervals. We carry out the corresponding slider and pull it until the gaps appear between the strokes.

Let's try to draw a line.

Since we are most likely needed directly, then we shifted the guide from the line (horizontal or vertical, which wish).

Then we put the brush the first point on the guide and, without releasing the mouse button, clamp Shift. And put the second point.

Hide and show guides by keys Ctrl + H..

If you have a hard hand, then you can spend the line and without a key Shift..

For vertical lines, you need to make another setting.

Press key again F5 And we see such a tool:

With it, we can rotate the dotted line for any angle. For vertical line It will be 90 degrees. It is not difficult to guess that the dotted lines can be carried out in any directions.

So it is not good way. We learned to draw dotted lines in Photoshop.

In this lesson, I will tell you how to make dotted lines. The easiest way: we will take a pen with you, choose the "Figure" mode, remove the "fill" to "no color" and choose the color for the stroke that we wanted. Let it be blue. Also at this stage, we need to choose which thickness we will have a dotted line. Let's, let's say, 2 pixels and choose what it will be. Will these points or it will be dotted. Let's choose them.

And just draw an arbitrary line that will ultimately be needed. After we press "ENTER", the contour disappears, only the dotted line remains. This is the easiest way, but it does not always work. On some versions, Photoshop will not do so. And for this there is a second way in which we will also need a pen tool.

Here we already draw in the "contour" mode. We also create a bend that we would like. Let it be such a semicircle. And now we need to switch to the "Text" tool. Take the cursor to the contour, and we will see that such a small dashed line appears next to our cursor. This means that when we click, our circuit will turn into editable, and here we can write any text. But since we create a dotted line, we just need to click on the dash many times. This contour turned out. Also, this circuit can be included with points. The second method is the text.

And one more way, it is also an outlining contour using the "Brush" tool. First step - we set up a brush with you. To do this, we need to first make this brush. We create a new document: Ctrl + N. -27 pixels and height - 6. At this stage, we need to ask the size that will be equal to the stitch size. Choose transparent background. Click "OK". And pour this document in black. Now we need to define a brush: editing / defining a brush. Let's call it and click "OK". This document can be deleted.

We return to our main document, choose a "brush", and as you can see, it is already worth it. We choose the opacity of the brush 100% and go to the palette settings and change its parameters slightly. We will definitely need to increase the number of intervals, and go: Brushes / Control / Direction. And then our brush will repeat the bends of the contour. Also at this stage, set the color to which your brush will draw, and choose the size, it can be done a little less than a smaller one.

Now we also take the pen tool. Draw the contour that we need. Also act in the circuit mode. We sum up the "Feather" tool to the contour itself and right-click the "context menu / perform circuit stroke / choose our brush (the one we installed in the previous step. Press" OK ". The brush completely repeated the bend of the contour.